How to Use 2 or more tables with MS-ACCESS

HMG Samples and Enhancements

Moderator: Rathinagiri

Post Reply
User avatar
marco_malac
Posts: 11
Joined: Mon Dec 08, 2008 12:54 pm
Location: Brazil , São Paulo-SP

How to Use 2 or more tables with MS-ACCESS

Post by marco_malac »

People, i've read all information about harbour/minigui x access over the internet, it's working OK ( to create, add, read, etc ) , but i would like so much to know how to use 2 or more tables inside the .mdb file. I have this exemple :

USE test2.mdb VIA "ADORDD" Table "table1" ALIAS T1
GO TOP

but : If i want use a second table for ex, T2, if i use the same syntax i have a error message.

Anybody could send me a tip ?

Thanks a Lot
========================================================
"Better than to know about the information is to know what to do with the information that you have."
Marco Antonio ( marco_malac )
Car Tuning / Bikes and adventure around the earth.
Post Reply